{"id":96925,"date":"2026-11-16T16:16:48","date_gmt":"2026-11-16T15:16:48","guid":{"rendered":"https:\/\/car-o-liner.com\/beyond-tolerance\/"},"modified":"2026-11-16T16:22:27","modified_gmt":"2026-11-16T15:22:27","slug":"beyond-tolerance","status":"publish","type":"post","link":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/","title":{"rendered":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Structural repairs today aren\u2019t just about hitting a number and moving on. You can meet OEM tolerances on a measurement sheet and still end up with a vehicle that doesn\u2019t respond correctly once the structure is carrying suspension and drivetrain forces again.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">On the bench, everything is controlled: the vehicle is secured, stable, and you\u2019re reading known points against known data. That\u2019s necessary, but it\u2019s not the whole job. Once the vehicle is back under normal stress, the structure has to transfer them the way it was engineered to. If it\u2019s barely in range across multiple points, that \u201cgood enough\u201d can turn into \u201cnot actually right.\u201d<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Most experienced technicians have seen the pattern. The vehicle checks out, the measurement report looks clean, and nothing is technically incorrect. Then it comes back with a steering pull, uneven tire wear, wind noise, or panel fit that never quite settles. No single point is out of range. The vehicle is \u201cwithin spec.\u201d But once the structure is back under force again, those edge-of-range points, especially when they land in opposing directions, can stack into a condition the measurement sheet doesn\u2019t reveal.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">That\u2019s why getting it into range isn\u2019t enough. Restored performance is the Car-O-Liner\u00ae standard. When measuring, anchoring, straightening, and joining reinforce each other, you stop chasing green numbers at the end of the job. You start controlling the repair as it happens with integrated measuring, OEM reference data, and stable anchoring.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"624\" src=\"https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-02-1024x624.png\" alt=\"a semi transparent van sitting on a Benchrack versa \" class=\"wp-image-96904\" srcset=\"https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-02-1024x624.png 1024w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-02-300x183.png 300w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-02-767x467.png 767w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-02.png 1478w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Spec Compliant vs. Performance Safe Repairs<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/car-o-liner.com\/en-us\/oem-page\/\">OEM<\/a> tolerance is often misunderstood. A \u00b12\u20133mm specification does not mean a technician has 3mm of freedom everywhere. It means a point may be plus or minus from nominal\u2014not both. If one reference point is corrected to +2mm while another is left at -2mm, the structure can be effectively 4mm out across those locations, even though both measurements technically pass. That difference doesn\u2019t show up as a red number on a report, but it absolutely shows up once the vehicle is under load.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Performance safe repairs aim to put the structure back to its intended position, not the edge. \u201cIn range\u201d tells you the vehicle can be released on paper. But when it\u2019s centered up in the spec, you know the structure is back to doing its job. With advanced materials, engineered load paths, and integrated safety systems, modern vehicles leave little room for cumulative error, even when every individual point technically passes.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Why \u201cWithin Tolerance\u201d Still Fails on the Road<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Tolerance allows variation, not perfection. When tolerances are treated as a total allowance instead of a directional limit, small deviations can cancel each other on paper while compounding in the real world. The measurement report may show every point in green, but the structure is no longer centered in its intended geometry. Once suspension loads, drivetrain torque, and road forces are reintroduced, those opposing deviations reveal themselves through handling, tire wear, noise, and calibration instability.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Here are common outcomes that can show up even when the measurements technically pass:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Subtle tracking or steering pull<\/li>\n\n\n\n<li>Increased or uneven tire wear<\/li>\n\n\n\n<li>Wind noise that wasn\u2019t present pre-loss<\/li>\n\n\n\n<li>Panel fit inconsistencies that resist adjustment<\/li>\n\n\n\n<li>ADAS calibration sensitivity or repeated recalibration attempts<\/li>\n\n\n\n<li>A vehicle that measures fine but never quite feels settled<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\">Energy management adds another layer of risk. Primary structural components are engineered to absorb and transfer impact forces predictably. If a component is over pulled, under corrected but still within tolerance or hardened from repeated pulls, it may measure acceptable but respond differently in a subsequent collision. With ultra-high-strength steel (UHSS), aluminum, and mixed material assemblies, repair thresholds are narrow, and small distortions can affect weld integrity, residual stress, and future force transfer.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"1024\" height=\"626\" src=\"https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-03-1024x626.png\" alt=\"A target with tolerance indicators\" class=\"wp-image-96914\" srcset=\"https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-03-1024x626.png 1024w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-03-300x183.png 300w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-03-768x469.png 768w, https:\/\/car-o-liner.com\/wp-content\/uploads\/COL-beyond-tolerance-03.png 1473w\" sizes=\"auto, (max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n<\/div>\n\n\n<h2 class=\"wp-block-heading\">Training Technicians to Target Center-of-Spec<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Training stops being generic when the workflow prioritizes control over final confirmation. Consistent results come from doing the same checks, the same way:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><p><b>Target center-of-spec, not just \u201cin range\u201d<\/b><\/p><p>Pull back to target and hold it there to reduce dimensional stacking and prevent borderline geometry from showing up later<\/p><\/li>\n\n\n\n<li><p><b>Blueprint before you pull<\/b><\/p><p>Compare pre-repair measurements, separate primary damage from secondary movement, and map the load paths before force is applied<\/p><\/li>\n\n\n\n<li><p><b>Use live measuring during pulling<\/b><\/p>\n<p>With Vision2\u2122, technicians can see deviation changes during the pull, avoid over-correction, and keep symmetry under control while the vehicle is fixtured<\/p>\n<\/li>\n\n\n\n<li><p><b>Anchor like the pull matters<\/b><\/p>\n<p>Correct anchoring and holding reduces secondary distortion and makes the pull repeatable instead of reactive<\/p>\n<\/li>\n\n\n\n<li><p><b>Verify as you go<\/b><\/p>\n<p>Measure, correct, recheck, and document during restoration, not only after the structure has settled<\/p>\n<\/li>\n<\/ol>\n\n\n\n<p class=\"wp-block-paragraph\"><em>Car-O-Liner<\/em> Academy training reinforces the structural \u201cwhy\u201d behind these steps: load paths, metal behavior under stress, multi-point evaluation, and proper anchoring and fixturing.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How Car-O-Liner Supports Structural Restoration<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><em>Car-O-Liner<\/em> systems keep diagnosis, correction, and verification connected using <a href=\"https:\/\/car-o-liner.com\/en-us\/product\/car-o-tronic\/\">Car-O-Tronic\u00ae<\/a> with Vision2\u2122 Software, Car-O-Data\u00ae, <a href=\"https:\/\/car-o-liner.com\/en-us\/product\/benchrack-versa\/\">BenchRack\u2122 Versa<\/a> or QUICK42\u2122, and <a href=\"https:\/\/car-o-liner.com\/en-us\/product\/evo\/\">EVO\u2122 1-2-3.<\/a> This ensures technicians can control structure throughout the repair, document decisions, and verify results without relying on end-of-job measurement alone.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">The Real Standard: Restored Performance<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">A vehicle that tracks straight, accepts ADAS calibration cleanly, holds consistent panel gaps, and manages impact energy as designed didn\u2019t just pass a tolerance check. It performs. That result comes from controlling the repair while it\u2019s happening, not validating it afterward. Meeting specifications is the baseline. Restoring performance is the responsibility. So measure with intent and anchor with purpose. Restore the structure, not just the numbers.<\/p>\n\n\n<\/p>\n<\/p>\n<p>\n\n\n<p class=\"wp-block-paragraph\"><\/p>\n","protected":false},"excerpt":{"rendered":"<p>Structural repairs today aren\u2019t just about hitting a number and moving on. You can meet OEM tolerances on a measurement sheet and still end up with a vehicle that doesn\u2019t respond correctly once the structure is carrying suspension and drivetrain forces again. On the bench, everything is controlled: the vehicle is secured, stable, and you\u2019re [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":96897,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"page-templates\/post-improved.php","format":"standard","meta":{"footnotes":""},"categories":[15],"tags":[],"class_list":["post-96925","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-uncategorized-en-us"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.8 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner\" \/>\n<meta property=\"og:description\" content=\"Structural repairs today aren\u2019t just about hitting a number and moving on. You can meet OEM tolerances on a measurement sheet and still end up with a vehicle that doesn\u2019t respond correctly once the structure is carrying suspension and drivetrain forces again. On the bench, everything is controlled: the vehicle is secured, stable, and you\u2019re [&hellip;]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/\" \/>\n<meta property=\"og:site_name\" content=\"Car-O-Liner\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-16T15:16:48+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-11-16T15:22:27+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"2560\" \/>\n\t<meta property=\"og:image:height\" content=\"852\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/\"},\"headline\":\"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short\",\"datePublished\":\"2026-11-16T15:16:48+00:00\",\"dateModified\":\"2026-11-16T15:22:27+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/\"},\"wordCount\":913,\"publisher\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/beyond-tolerance-COL-header.jpg\",\"articleSection\":[\"Uncategorized @en-us\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/\",\"url\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/\",\"name\":\"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/beyond-tolerance-COL-header.jpg\",\"datePublished\":\"2026-11-16T15:16:48+00:00\",\"dateModified\":\"2026-11-16T15:22:27+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#primaryimage\",\"url\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/beyond-tolerance-COL-header.jpg\",\"contentUrl\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/beyond-tolerance-COL-header.jpg\",\"width\":2560,\"height\":852,\"caption\":\"Technician measuring a car using Car-O-Tronic\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/beyond-tolerance\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#website\",\"url\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/\",\"name\":\"Car-O-Liner\",\"description\":\"Collision Repair Equipment\",\"publisher\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#organization\",\"name\":\"Car-O-Liner\",\"url\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/Car-O-Liner-blue-web.svg\",\"contentUrl\":\"https:\\\/\\\/car-o-liner.com\\\/wp-content\\\/uploads\\\/Car-O-Liner-blue-web.svg\",\"width\":250,\"height\":50,\"caption\":\"Car-O-Liner\"},\"image\":{\"@id\":\"https:\\\/\\\/car-o-liner.com\\\/en-us\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/","og_locale":"en_US","og_type":"article","og_title":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner","og_description":"Structural repairs today aren\u2019t just about hitting a number and moving on. You can meet OEM tolerances on a measurement sheet and still end up with a vehicle that doesn\u2019t respond correctly once the structure is carrying suspension and drivetrain forces again. On the bench, everything is controlled: the vehicle is secured, stable, and you\u2019re [&hellip;]","og_url":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/","og_site_name":"Car-O-Liner","article_published_time":"2026-11-16T15:16:48+00:00","article_modified_time":"2026-11-16T15:22:27+00:00","og_image":[{"width":2560,"height":852,"url":"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg","type":"image\/jpeg"}],"twitter_card":"summary_large_image","schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#article","isPartOf":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/"},"headline":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short","datePublished":"2026-11-16T15:16:48+00:00","dateModified":"2026-11-16T15:22:27+00:00","mainEntityOfPage":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/"},"wordCount":913,"publisher":{"@id":"https:\/\/car-o-liner.com\/en-us\/#organization"},"image":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#primaryimage"},"thumbnailUrl":"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg","articleSection":["Uncategorized @en-us"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/","url":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/","name":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short - Car-O-Liner","isPartOf":{"@id":"https:\/\/car-o-liner.com\/en-us\/#website"},"primaryImageOfPage":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#primaryimage"},"image":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#primaryimage"},"thumbnailUrl":"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg","datePublished":"2026-11-16T15:16:48+00:00","dateModified":"2026-11-16T15:22:27+00:00","breadcrumb":{"@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#primaryimage","url":"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg","contentUrl":"https:\/\/car-o-liner.com\/wp-content\/uploads\/beyond-tolerance-COL-header.jpg","width":2560,"height":852,"caption":"Technician measuring a car using Car-O-Tronic"},{"@type":"BreadcrumbList","@id":"https:\/\/car-o-liner.com\/en-us\/beyond-tolerance\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/car-o-liner.com\/en-us\/"},{"@type":"ListItem","position":2,"name":"Beyond Tolerance: Spec-Compliant Repairs That Still Fall Short"}]},{"@type":"WebSite","@id":"https:\/\/car-o-liner.com\/en-us\/#website","url":"https:\/\/car-o-liner.com\/en-us\/","name":"Car-O-Liner","description":"Collision Repair Equipment","publisher":{"@id":"https:\/\/car-o-liner.com\/en-us\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/car-o-liner.com\/en-us\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/car-o-liner.com\/en-us\/#organization","name":"Car-O-Liner","url":"https:\/\/car-o-liner.com\/en-us\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/car-o-liner.com\/en-us\/#\/schema\/logo\/image\/","url":"https:\/\/car-o-liner.com\/wp-content\/uploads\/Car-O-Liner-blue-web.svg","contentUrl":"https:\/\/car-o-liner.com\/wp-content\/uploads\/Car-O-Liner-blue-web.svg","width":250,"height":50,"caption":"Car-O-Liner"},"image":{"@id":"https:\/\/car-o-liner.com\/en-us\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/posts\/96925","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/comments?post=96925"}],"version-history":[{"count":1,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/posts\/96925\/revisions"}],"predecessor-version":[{"id":96926,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/posts\/96925\/revisions\/96926"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/media\/96897"}],"wp:attachment":[{"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/media?parent=96925"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/categories?post=96925"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/car-o-liner.com\/en-us\/wp-json\/wp\/v2\/tags?post=96925"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}