学院

卓越的碰撞修复教育

为什么选择学院

我们关注客户、合作伙伴及其员工的发展需求。我们通过培训和指导提供定制的解决方案，利用既定的流程、结构和标准，提高车间的质量、安全性和盈利能力。

专业培训：为我们的碰撞维修系统量身定制。
专家讲师：向业界专业人士学习。
实践经验：从应用中获得实际见解。
持续学习：掌握不断发展的维修技术。

A repair technician measuring using Car-O-Tronic® measuring system

我们提供什么

我们的课程包含理论和实践练习的均衡组合，以及知识检查。该计划还可以根据任何商店的需求进行定制。

基础培训：掌握 Car-O-Liner® 系统的核心功能。
先进技术：通过尖端课程提高您的熟练程度。
持续的协助：我们对您成功的承诺不会结束——持续的支持

A repair technician measuring a vehicle during a training course

您在哪里找到我们

专业的研讨室、小组和经验丰富的培训师保证了候选人的高度满意度，他们随后将以更高的效率和专业精神开展工作。

学院在世界各地多个地点提供课程。探索并找到最近的培训设施以及一系列可用的课程。

意大利

Methods Courses

▷

MAG welding

C103 - MAG welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable the participant to perform MAG welding on steel body panels.
Objectives	After completing the course, the participants should be able to: Perform MAG welding of different steel materials Understand the importance of the correct methods for welding Understand & demonstrate weld test procedures
Course Content	Theory: Body materials MAG welding process Welding equipment Shielding gases Welding transfer Welding wire types Welding methods & techniques Welding defects Welding stress and distortion Welding tests and inspection Practical: Welder preparation Welding methods Welding positions Welding test and inspection OEM specifications Post test
Language	English Swedish

▷

Resistance Spot Welding

C106 - Resistance Spot Welding

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable participants to perform resistance spot welding on steel body panels.
Objectives	After the course the participants should: Be able to perform resistance spot welding on different steel materials Understand the importance of correct welding methods Understand and demonstrate test procedures for welds
Content	Theory: Resistance spot welding process Equipment for welding Personal safety equipment Principles for resistance spot welding Vehicle body materials Welding situations Weld quality Verification / Quality Assurance OEM requirements Preparing the welding machine Practical: Preparing the welding machine Maintaining the welder Welding different materials & coatings Destructive testing OEM applications Post test
Language	English Swedish

▷

Alignment – steel components

C301 - Alignment – steel components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels
Aim	To enable the participant to perform alignment of steel components of a collision damaged vehicle.
Objectives	After completing the course, the participants should be able to: Chose and use suitable tools and suitable equipment for alignment of steel components Handle equipment according to instructions Adjust and align cosmetic steel panels to original specification Use induction heater to warm and align steel components
Course Content	Theory: Which equipment to use and when and how Safety risks Basic principles for the tools Where you find information on procedures for maintenance and storage of equipment Material characteristics Available repair methods Where you find information on which methods to be used according to OEM requirements Practical: Practical exercises are included in every theoretical subject. Post test
Language	English Swedish

▷

Structural Repairs – steel

C304 - Structural Repairs – steel

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – structural components
Aim	To enable the participant to carry out structural damage repairs to a collision-damaged vehicle
Objectives	After completing the course, participants should be able to: Handle equipment in accordance with instructions Decide on the most efficient methods Select and use appropriate tools and equipment Use equipment without causing damage to equipment, components or vehicles, or injury to persons Use equipment to straighten out body components as required Remove and replace various structural panels, parts, subframes etc. Check body measurements Adjust structural panels and subframes
Content	Theory: Development of body materials Body materials and properties – Steel Service information Deformation and safety zones Collision theory Damage diagnosis Equipment for draw alignment work Work on alignment bench Practical: Practical exercises are included in all theoretical subject areas
Language	English Swedish

▷

Bonding and Riveting

C436 - Bonding and Riveting

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform joining of panels using bonding and riveting.
Objectives	After completing the course, the participants should be able to: Understand the importance of the correct methods for bonding and riveting. Perform joining of different materials by bonding and riveting. Handle equipment according to the instructions. Understand the assessment of riveting quality.
Content	Theory: About Bonding and Riveting Bonding Riveting Tools and Equipment Tool Operation Examples OEM Information Practical: Finding rivets and body materials exercise Safety Information before Practical Work Tool and Equipment presentations Riveting exercises Blind rivets and Blind rivet nuts Punch rivets and Flow-form rivets Flow-drill screws and Bonding Assessment of quality Post test
Language	English

▷

Aluminum welding

C426 - Aluminum welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when welding aluminum sheet metal.
Objectives	After the course the participants should: Be able to describe the material properties of aluminum. Be able to describe how gas metal arc welding works. Be able to describe the technicalities of MIG welding. Be able to describe the technicalities of pulsed MIG welding. Have knowledge on workplace and occupational health and safety when working with aluminum. Be proficient when preparing and joining workpieces of aluminum. Be proficient when welding aluminum. Be able to carry out the most important maintenance work related to the welder.
Course Content	Theory: Introduction Workplace and occupational health and safety Gas metal arc welding MIG welding Pulsed MIG welding Acceptable and not acceptable weld beads Practical: Welder maintenance, hardware and software Lap joint Butt joint with backing weld Plug weld Vertical butt joint with backing weld Overhead butt joint with backing weld Competence elements covered in course: 2_35 Equipment for joining – MIG-/MAG-welder 2_36 Equipment for joining – Welder with pulsed MIG function
Pre-study	N/A
Other information	This is a course with theory, discussions and practical exercises.
Language	English Swedish

▷

Alignment, Aluminum Components

C428 - Alignment, Aluminum Components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when aligning aluminum sheet metal.
Objectives	After the course the participants should be able to: Choose and use suitable tools and equipment for alignment of aluminum sheet metal components. Handle equipment according to instructions. Adjust and align cosmetic panels to original specification.
Content	Theory: Introduction to Aluminum Safety Aluminum in vehicles Tools and Equipment Manufacturers Repair Information Damage Assessment Aluminum Repair Methods Practical: Demonstration of material properties Safety information Demonstration of aluminum spotter and puller Repair exercises using hammer and dolly Repair exercises using spotter and puller
Pre-study	*General* Task: The participants should check the OEM Repair Information at their workplace, and collect information and recommendations on aluminum repair work.
Other information	This is a course with theory, discussions and practical exercises.
Language	English

▷

Measuring and Damage Assessment

C427 - Measuring and Damage Assessment

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform measurement and damage assessment on a collision damaged vehicle on an alignment bench.
Objectives	After completing the course, the participants should: Understand the behavior of a vehicle in a collision Be able to carry out damage assessment using measuring tool Understand the importance of using OEM information
Content	Theory: Why measure? Body materials Deformation zones Collision theory Damage diagnosis and assessment OEM information Equipment overview Measuring system introduction Practical: Set up the vehicle on an alignment bench. Measuring of damaged and undamaged parts of the vehicle Using the measuring system to carry out damage assessment Upper body and Point-to-point measuring Documentation
Pre-study	N/A
Language	English

▷

Paintless Dent Repair

C435 - Paintless Dent Repair

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Anyone within the vehicle repair industry
Aim	To enable the participant to perform Paintless Dent Repair (PDR).
Objectives	After completing the course, the participants should be able to: Understand the methods for removing minor dents in body panels without repainting Analyze the damage and choose the appropriate repair method Apply the best repair method by using the appropriate tools Perform a variety of repair techniques on damage occurring in different body panels and in a variety of materials
Content	The course covers the following subjects: Theory: About Paintless Dent Repair Tools and Equipment Accessories Working with Lighting Access for repair of dent Paintless Dent Repair methods Glue Puller methods Practical: Safety Information before Practical Work PDR tools Trainer presentations and demonstrations Participant exercises Glue puller Trainer demonstrations Participant exercises Final test
Pre-study	N/A
Language	English

Product Courses

▷

Universal Riveting System

O404 - Universal Riveting System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the Universal Rivet System is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the rivet tools Be able to prepare the tools for use Be able to carry out riveting using the PNP 90 XT2 Be able to carry out blind riveting using the BNW 25 kN
Course Content	Theory: PNP 90, 6 Ton Rivet Tool PNP 90 XT2, 10 Ton Rivet Tool Upgrade Kit BNW 25 kN, Blind Rivet Tool Documentation Storage Cart Practical: Trainer demonstrations Participant exercises
Pre-study	It is recommended that participants read the document below to gain familiarity with the Universal Rivet System before attending the course. Universal Rivet System Brochure
Language	English

▷

CTR9 Resistance Spot Welder

O405 - CTR9 Resistance Spot Welder

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the CTR9 Spot Welder is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the CTR9 Spot Welder Be able to prepare the CTR9 Spot Welder for use Be able to carry out welding using the C-Tong Be able to carry out welding using the Multi Function Gun Be able to setup and use the WeldLogger
Content	Theory: Review of CTR9 Spot Welder Welder Start and Setup C-Tong Modes C-Tong Operation WeldLogger Multi Function Gun Maintenance Practical: Preparing the Welder Using C-Tong and Support arm Welding with the C-Tong Using the WeldLogger Setting up and Welding with the Multi Function Gun Maintenance
Pre-study	It is recommended that participants read the documents below to gain familiarity with the CTR9 Spot Welder before attending the course. CTR9 Product Sheet CTR9 Brochure
Language	English

▷

PointX II Electronic Measuring System

O425 - PointX II Electronic Measuring System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Damage repair – all sections
Aim	To ensure operation of the PointX II is carried out in an optimum and safe way.
Objectives	After the course, the participants should: Be able to identify the key components on the PointX II Be able to prepare the PointX II for use Be able to carry out measuring using the PointX II Understand when to use the PointX II Understand why to use the PointX II Understand how to use the PointX II
Content	Theory: Introduction to the PointX II Measuring hardware Measuring software Vision2 Introduction Workorder tab Preparation tab Measuring tab Documentation tab Menus Features and Benefits Practical: Normal and Point-to-Point measuring From workorder to documentation
*Pre-study*	N/A
Language	English

▷

PNP 90 Riveting Tool

MP111 - PNP 90 Riveting Tool

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repairs – All sections
Aim	To ensure operation of the PNP 90 Riveting Tool is carried out in an optimum and safe way.
Objectives	After the course, the participants should be able to: Identify the key components on the rivet tools Prepare the tools for use Carry out riveting using the PNP 90
Content	Theory: Rivet Tool presentation Rivet Tool preparation Rivet Tool operation After operation Maintenance Practical: Trainer demonstrations Participant exercises
Language	English

▷

Car-O-Tronic Vision2 X3 – Operation

O402 - Car-O-Tronic Vision2 X3 – Operation

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Body shop technicians Damage repair – structural components
Aim	To enable the participants to perform measurement on a vehicle on an alignment bench using Car-O-Tronic Vision2 X3, and gain awareness of using draw aligner Q16/D16 and EVO systems.
Objectives	After completing the course, participants should be able to: Set up a vehicle on an alignment bench Perform measurement of a vehicle Understand the importance of the correct measuring methods Understand & demonstrate measuring procedures and results Understand & demonstrate draw aligner and EVO systems.
Content	Theory: Alignment Benches Draw Aligners Measuring system Hardware Measuring system Software Normal measuring HMP measuring Absolute measuring Comparative measuring Point to point measuring Suspension check Surface measuring EVO 1, 2 & 3 Practical: Trainer presentations of all functions. Participant exercises on all functions.
Pre-study	N/A
Language	English, Swedish

德国

Product Courses

▷

Universal Riveting System

O404 - Universal Riveting System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the Universal Rivet System is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the rivet tools Be able to prepare the tools for use Be able to carry out riveting using the PNP 90 XT2 Be able to carry out blind riveting using the BNW 25 kN
Course Content	Theory: PNP 90, 6 Ton Rivet Tool PNP 90 XT2, 10 Ton Rivet Tool Upgrade Kit BNW 25 kN, Blind Rivet Tool Documentation Storage Cart Practical: Trainer demonstrations Participant exercises
Pre-study	It is recommended that participants read the document below to gain familiarity with the Universal Rivet System before attending the course. Universal Rivet System Brochure
Language	English

▷

CTR9 Resistance Spot Welder

O405 - CTR9 Resistance Spot Welder

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the CTR9 Spot Welder is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the CTR9 Spot Welder Be able to prepare the CTR9 Spot Welder for use Be able to carry out welding using the C-Tong Be able to carry out welding using the Multi Function Gun Be able to setup and use the WeldLogger
Content	Theory: Review of CTR9 Spot Welder Welder Start and Setup C-Tong Modes C-Tong Operation WeldLogger Multi Function Gun Maintenance Practical: Preparing the Welder Using C-Tong and Support arm Welding with the C-Tong Using the WeldLogger Setting up and Welding with the Multi Function Gun Maintenance
Pre-study	It is recommended that participants read the documents below to gain familiarity with the CTR9 Spot Welder before attending the course. CTR9 Product Sheet CTR9 Brochure
Language	English

▷

PointX II Electronic Measuring System

O425 - PointX II Electronic Measuring System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Damage repair – all sections
Aim	To ensure operation of the PointX II is carried out in an optimum and safe way.
Objectives	After the course, the participants should: Be able to identify the key components on the PointX II Be able to prepare the PointX II for use Be able to carry out measuring using the PointX II Understand when to use the PointX II Understand why to use the PointX II Understand how to use the PointX II
Content	Theory: Introduction to the PointX II Measuring hardware Measuring software Vision2 Introduction Workorder tab Preparation tab Measuring tab Documentation tab Menus Features and Benefits Practical: Normal and Point-to-Point measuring From workorder to documentation
*Pre-study*	N/A
Language	English

▷

PNP 90 Riveting Tool

MP111 - PNP 90 Riveting Tool

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repairs – All sections
Aim	To ensure operation of the PNP 90 Riveting Tool is carried out in an optimum and safe way.
Objectives	After the course, the participants should be able to: Identify the key components on the rivet tools Prepare the tools for use Carry out riveting using the PNP 90
Content	Theory: Rivet Tool presentation Rivet Tool preparation Rivet Tool operation After operation Maintenance Practical: Trainer demonstrations Participant exercises
Language	English

▷

Car-O-Tronic Vision2 X3 – Operation

O402 - Car-O-Tronic Vision2 X3 – Operation

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Body shop technicians Damage repair – structural components
Aim	To enable the participants to perform measurement on a vehicle on an alignment bench using Car-O-Tronic Vision2 X3, and gain awareness of using draw aligner Q16/D16 and EVO systems.
Objectives	After completing the course, participants should be able to: Set up a vehicle on an alignment bench Perform measurement of a vehicle Understand the importance of the correct measuring methods Understand & demonstrate measuring procedures and results Understand & demonstrate draw aligner and EVO systems.
Content	Theory: Alignment Benches Draw Aligners Measuring system Hardware Measuring system Software Normal measuring HMP measuring Absolute measuring Comparative measuring Point to point measuring Suspension check Surface measuring EVO 1, 2 & 3 Practical: Trainer presentations of all functions. Participant exercises on all functions.
Pre-study	N/A
Language	English, Swedish

挪威

Methods Courses

▷

MAG welding

C103 - MAG welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable the participant to perform MAG welding on steel body panels.
Objectives	After completing the course, the participants should be able to: Perform MAG welding of different steel materials Understand the importance of the correct methods for welding Understand & demonstrate weld test procedures
Course Content	Theory: Body materials MAG welding process Welding equipment Shielding gases Welding transfer Welding wire types Welding methods & techniques Welding defects Welding stress and distortion Welding tests and inspection Practical: Welder preparation Welding methods Welding positions Welding test and inspection OEM specifications Post test
Language	English Swedish

▷

Resistance Spot Welding

C106 - Resistance Spot Welding

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable participants to perform resistance spot welding on steel body panels.
Objectives	After the course the participants should: Be able to perform resistance spot welding on different steel materials Understand the importance of correct welding methods Understand and demonstrate test procedures for welds
Content	Theory: Resistance spot welding process Equipment for welding Personal safety equipment Principles for resistance spot welding Vehicle body materials Welding situations Weld quality Verification / Quality Assurance OEM requirements Preparing the welding machine Practical: Preparing the welding machine Maintaining the welder Welding different materials & coatings Destructive testing OEM applications Post test
Language	English Swedish

▷

Alignment – steel components

C301 - Alignment – steel components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels
Aim	To enable the participant to perform alignment of steel components of a collision damaged vehicle.
Objectives	After completing the course, the participants should be able to: Chose and use suitable tools and suitable equipment for alignment of steel components Handle equipment according to instructions Adjust and align cosmetic steel panels to original specification Use induction heater to warm and align steel components
Course Content	Theory: Which equipment to use and when and how Safety risks Basic principles for the tools Where you find information on procedures for maintenance and storage of equipment Material characteristics Available repair methods Where you find information on which methods to be used according to OEM requirements Practical: Practical exercises are included in every theoretical subject. Post test
Language	English Swedish

▷

Structural Repairs – steel

C304 - Structural Repairs – steel

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – structural components
Aim	To enable the participant to carry out structural damage repairs to a collision-damaged vehicle
Objectives	After completing the course, participants should be able to: Handle equipment in accordance with instructions Decide on the most efficient methods Select and use appropriate tools and equipment Use equipment without causing damage to equipment, components or vehicles, or injury to persons Use equipment to straighten out body components as required Remove and replace various structural panels, parts, subframes etc. Check body measurements Adjust structural panels and subframes
Content	Theory: Development of body materials Body materials and properties – Steel Service information Deformation and safety zones Collision theory Damage diagnosis Equipment for draw alignment work Work on alignment bench Practical: Practical exercises are included in all theoretical subject areas
Language	English Swedish

▷

Bonding and Riveting

C436 - Bonding and Riveting

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform joining of panels using bonding and riveting.
Objectives	After completing the course, the participants should be able to: Understand the importance of the correct methods for bonding and riveting. Perform joining of different materials by bonding and riveting. Handle equipment according to the instructions. Understand the assessment of riveting quality.
Content	Theory: About Bonding and Riveting Bonding Riveting Tools and Equipment Tool Operation Examples OEM Information Practical: Finding rivets and body materials exercise Safety Information before Practical Work Tool and Equipment presentations Riveting exercises Blind rivets and Blind rivet nuts Punch rivets and Flow-form rivets Flow-drill screws and Bonding Assessment of quality Post test
Language	English

▷

Aluminum welding

C426 - Aluminum welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when welding aluminum sheet metal.
Objectives	After the course the participants should: Be able to describe the material properties of aluminum. Be able to describe how gas metal arc welding works. Be able to describe the technicalities of MIG welding. Be able to describe the technicalities of pulsed MIG welding. Have knowledge on workplace and occupational health and safety when working with aluminum. Be proficient when preparing and joining workpieces of aluminum. Be proficient when welding aluminum. Be able to carry out the most important maintenance work related to the welder.
Course Content	Theory: Introduction Workplace and occupational health and safety Gas metal arc welding MIG welding Pulsed MIG welding Acceptable and not acceptable weld beads Practical: Welder maintenance, hardware and software Lap joint Butt joint with backing weld Plug weld Vertical butt joint with backing weld Overhead butt joint with backing weld Competence elements covered in course: 2_35 Equipment for joining – MIG-/MAG-welder 2_36 Equipment for joining – Welder with pulsed MIG function
Pre-study	N/A
Other information	This is a course with theory, discussions and practical exercises.
Language	English Swedish

▷

Alignment, Aluminum Components

C428 - Alignment, Aluminum Components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when aligning aluminum sheet metal.
Objectives	After the course the participants should be able to: Choose and use suitable tools and equipment for alignment of aluminum sheet metal components. Handle equipment according to instructions. Adjust and align cosmetic panels to original specification.
Content	Theory: Introduction to Aluminum Safety Aluminum in vehicles Tools and Equipment Manufacturers Repair Information Damage Assessment Aluminum Repair Methods Practical: Demonstration of material properties Safety information Demonstration of aluminum spotter and puller Repair exercises using hammer and dolly Repair exercises using spotter and puller
Pre-study	*General* Task: The participants should check the OEM Repair Information at their workplace, and collect information and recommendations on aluminum repair work.
Other information	This is a course with theory, discussions and practical exercises.
Language	English

▷

Measuring and Damage Assessment

C427 - Measuring and Damage Assessment

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform measurement and damage assessment on a collision damaged vehicle on an alignment bench.
Objectives	After completing the course, the participants should: Understand the behavior of a vehicle in a collision Be able to carry out damage assessment using measuring tool Understand the importance of using OEM information
Content	Theory: Why measure? Body materials Deformation zones Collision theory Damage diagnosis and assessment OEM information Equipment overview Measuring system introduction Practical: Set up the vehicle on an alignment bench. Measuring of damaged and undamaged parts of the vehicle Using the measuring system to carry out damage assessment Upper body and Point-to-point measuring Documentation
Pre-study	N/A
Language	English

▷

Paintless Dent Repair

C435 - Paintless Dent Repair

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Anyone within the vehicle repair industry
Aim	To enable the participant to perform Paintless Dent Repair (PDR).
Objectives	After completing the course, the participants should be able to: Understand the methods for removing minor dents in body panels without repainting Analyze the damage and choose the appropriate repair method Apply the best repair method by using the appropriate tools Perform a variety of repair techniques on damage occurring in different body panels and in a variety of materials
Content	The course covers the following subjects: Theory: About Paintless Dent Repair Tools and Equipment Accessories Working with Lighting Access for repair of dent Paintless Dent Repair methods Glue Puller methods Practical: Safety Information before Practical Work PDR tools Trainer presentations and demonstrations Participant exercises Glue puller Trainer demonstrations Participant exercises Final test
Pre-study	N/A
Language	English

Product Courses

▷

Universal Riveting System

O404 - Universal Riveting System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the Universal Rivet System is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the rivet tools Be able to prepare the tools for use Be able to carry out riveting using the PNP 90 XT2 Be able to carry out blind riveting using the BNW 25 kN
Course Content	Theory: PNP 90, 6 Ton Rivet Tool PNP 90 XT2, 10 Ton Rivet Tool Upgrade Kit BNW 25 kN, Blind Rivet Tool Documentation Storage Cart Practical: Trainer demonstrations Participant exercises
Pre-study	It is recommended that participants read the document below to gain familiarity with the Universal Rivet System before attending the course. Universal Rivet System Brochure
Language	English

▷

CTR9 Resistance Spot Welder

O405 - CTR9 Resistance Spot Welder

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the CTR9 Spot Welder is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the CTR9 Spot Welder Be able to prepare the CTR9 Spot Welder for use Be able to carry out welding using the C-Tong Be able to carry out welding using the Multi Function Gun Be able to setup and use the WeldLogger
Content	Theory: Review of CTR9 Spot Welder Welder Start and Setup C-Tong Modes C-Tong Operation WeldLogger Multi Function Gun Maintenance Practical: Preparing the Welder Using C-Tong and Support arm Welding with the C-Tong Using the WeldLogger Setting up and Welding with the Multi Function Gun Maintenance
Pre-study	It is recommended that participants read the documents below to gain familiarity with the CTR9 Spot Welder before attending the course. CTR9 Product Sheet CTR9 Brochure
Language	English

▷

PointX II Electronic Measuring System

O425 - PointX II Electronic Measuring System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Damage repair – all sections
Aim	To ensure operation of the PointX II is carried out in an optimum and safe way.
Objectives	After the course, the participants should: Be able to identify the key components on the PointX II Be able to prepare the PointX II for use Be able to carry out measuring using the PointX II Understand when to use the PointX II Understand why to use the PointX II Understand how to use the PointX II
Content	Theory: Introduction to the PointX II Measuring hardware Measuring software Vision2 Introduction Workorder tab Preparation tab Measuring tab Documentation tab Menus Features and Benefits Practical: Normal and Point-to-Point measuring From workorder to documentation
*Pre-study*	N/A
Language	English

▷

PNP 90 Riveting Tool

MP111 - PNP 90 Riveting Tool

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repairs – All sections
Aim	To ensure operation of the PNP 90 Riveting Tool is carried out in an optimum and safe way.
Objectives	After the course, the participants should be able to: Identify the key components on the rivet tools Prepare the tools for use Carry out riveting using the PNP 90
Content	Theory: Rivet Tool presentation Rivet Tool preparation Rivet Tool operation After operation Maintenance Practical: Trainer demonstrations Participant exercises
Language	English

▷

Car-O-Tronic Vision2 X3 – Operation

O402 - Car-O-Tronic Vision2 X3 – Operation

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Body shop technicians Damage repair – structural components
Aim	To enable the participants to perform measurement on a vehicle on an alignment bench using Car-O-Tronic Vision2 X3, and gain awareness of using draw aligner Q16/D16 and EVO systems.
Objectives	After completing the course, participants should be able to: Set up a vehicle on an alignment bench Perform measurement of a vehicle Understand the importance of the correct measuring methods Understand & demonstrate measuring procedures and results Understand & demonstrate draw aligner and EVO systems.
Content	Theory: Alignment Benches Draw Aligners Measuring system Hardware Measuring system Software Normal measuring HMP measuring Absolute measuring Comparative measuring Point to point measuring Suspension check Surface measuring EVO 1, 2 & 3 Practical: Trainer presentations of all functions. Participant exercises on all functions.
Pre-study	N/A
Language	English, Swedish

瑞典

Methods Courses

▷

MAG welding

C103 - MAG welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable the participant to perform MAG welding on steel body panels.
Objectives	After completing the course, the participants should be able to: Perform MAG welding of different steel materials Understand the importance of the correct methods for welding Understand & demonstrate weld test procedures
Course Content	Theory: Body materials MAG welding process Welding equipment Shielding gases Welding transfer Welding wire types Welding methods & techniques Welding defects Welding stress and distortion Welding tests and inspection Practical: Welder preparation Welding methods Welding positions Welding test and inspection OEM specifications Post test
Language	English Swedish

▷

Resistance Spot Welding

C106 - Resistance Spot Welding

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable participants to perform resistance spot welding on steel body panels.
Objectives	After the course the participants should: Be able to perform resistance spot welding on different steel materials Understand the importance of correct welding methods Understand and demonstrate test procedures for welds
Content	Theory: Resistance spot welding process Equipment for welding Personal safety equipment Principles for resistance spot welding Vehicle body materials Welding situations Weld quality Verification / Quality Assurance OEM requirements Preparing the welding machine Practical: Preparing the welding machine Maintaining the welder Welding different materials & coatings Destructive testing OEM applications Post test
Language	English Swedish

▷

Alignment – steel components

C301 - Alignment – steel components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels
Aim	To enable the participant to perform alignment of steel components of a collision damaged vehicle.
Objectives	After completing the course, the participants should be able to: Chose and use suitable tools and suitable equipment for alignment of steel components Handle equipment according to instructions Adjust and align cosmetic steel panels to original specification Use induction heater to warm and align steel components
Course Content	Theory: Which equipment to use and when and how Safety risks Basic principles for the tools Where you find information on procedures for maintenance and storage of equipment Material characteristics Available repair methods Where you find information on which methods to be used according to OEM requirements Practical: Practical exercises are included in every theoretical subject. Post test
Language	English Swedish

▷

Structural Repairs – steel

C304 - Structural Repairs – steel

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – structural components
Aim	To enable the participant to carry out structural damage repairs to a collision-damaged vehicle
Objectives	After completing the course, participants should be able to: Handle equipment in accordance with instructions Decide on the most efficient methods Select and use appropriate tools and equipment Use equipment without causing damage to equipment, components or vehicles, or injury to persons Use equipment to straighten out body components as required Remove and replace various structural panels, parts, subframes etc. Check body measurements Adjust structural panels and subframes
Content	Theory: Development of body materials Body materials and properties – Steel Service information Deformation and safety zones Collision theory Damage diagnosis Equipment for draw alignment work Work on alignment bench Practical: Practical exercises are included in all theoretical subject areas
Language	English Swedish

▷

Bonding and Riveting

C436 - Bonding and Riveting

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform joining of panels using bonding and riveting.
Objectives	After completing the course, the participants should be able to: Understand the importance of the correct methods for bonding and riveting. Perform joining of different materials by bonding and riveting. Handle equipment according to the instructions. Understand the assessment of riveting quality.
Content	Theory: About Bonding and Riveting Bonding Riveting Tools and Equipment Tool Operation Examples OEM Information Practical: Finding rivets and body materials exercise Safety Information before Practical Work Tool and Equipment presentations Riveting exercises Blind rivets and Blind rivet nuts Punch rivets and Flow-form rivets Flow-drill screws and Bonding Assessment of quality Post test
Language	English

▷

Aluminum welding

C426 - Aluminum welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when welding aluminum sheet metal.
Objectives	After the course the participants should: Be able to describe the material properties of aluminum. Be able to describe how gas metal arc welding works. Be able to describe the technicalities of MIG welding. Be able to describe the technicalities of pulsed MIG welding. Have knowledge on workplace and occupational health and safety when working with aluminum. Be proficient when preparing and joining workpieces of aluminum. Be proficient when welding aluminum. Be able to carry out the most important maintenance work related to the welder.
Course Content	Theory: Introduction Workplace and occupational health and safety Gas metal arc welding MIG welding Pulsed MIG welding Acceptable and not acceptable weld beads Practical: Welder maintenance, hardware and software Lap joint Butt joint with backing weld Plug weld Vertical butt joint with backing weld Overhead butt joint with backing weld Competence elements covered in course: 2_35 Equipment for joining – MIG-/MAG-welder 2_36 Equipment for joining – Welder with pulsed MIG function
Pre-study	N/A
Other information	This is a course with theory, discussions and practical exercises.
Language	English Swedish

▷

Alignment, Aluminum Components

C428 - Alignment, Aluminum Components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Workshop personnel
Aim	To ensure workshop personnel is proficient when aligning aluminum sheet metal.
Objectives	After the course the participants should be able to: Choose and use suitable tools and equipment for alignment of aluminum sheet metal components. Handle equipment according to instructions. Adjust and align cosmetic panels to original specification.
Content	Theory: Introduction to Aluminum Safety Aluminum in vehicles Tools and Equipment Manufacturers Repair Information Damage Assessment Aluminum Repair Methods Practical: Demonstration of material properties Safety information Demonstration of aluminum spotter and puller Repair exercises using hammer and dolly Repair exercises using spotter and puller
Pre-study	*General* Task: The participants should check the OEM Repair Information at their workplace, and collect information and recommendations on aluminum repair work.
Other information	This is a course with theory, discussions and practical exercises.
Language	English

▷

Measuring and Damage Assessment

C427 - Measuring and Damage Assessment

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians
Aim	To enable the participant to perform measurement and damage assessment on a collision damaged vehicle on an alignment bench.
Objectives	After completing the course, the participants should: Understand the behavior of a vehicle in a collision Be able to carry out damage assessment using measuring tool Understand the importance of using OEM information
Content	Theory: Why measure? Body materials Deformation zones Collision theory Damage diagnosis and assessment OEM information Equipment overview Measuring system introduction Practical: Set up the vehicle on an alignment bench. Measuring of damaged and undamaged parts of the vehicle Using the measuring system to carry out damage assessment Upper body and Point-to-point measuring Documentation
Pre-study	N/A
Language	English

▷

Paintless Dent Repair

C435 - Paintless Dent Repair

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Anyone within the vehicle repair industry
Aim	To enable the participant to perform Paintless Dent Repair (PDR).
Objectives	After completing the course, the participants should be able to: Understand the methods for removing minor dents in body panels without repainting Analyze the damage and choose the appropriate repair method Apply the best repair method by using the appropriate tools Perform a variety of repair techniques on damage occurring in different body panels and in a variety of materials
Content	The course covers the following subjects: Theory: About Paintless Dent Repair Tools and Equipment Accessories Working with Lighting Access for repair of dent Paintless Dent Repair methods Glue Puller methods Practical: Safety Information before Practical Work PDR tools Trainer presentations and demonstrations Participant exercises Glue puller Trainer demonstrations Participant exercises Final test
Pre-study	N/A
Language	English

Product Courses

▷

Universal Riveting System

O404 - Universal Riveting System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the Universal Rivet System is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the rivet tools Be able to prepare the tools for use Be able to carry out riveting using the PNP 90 XT2 Be able to carry out blind riveting using the BNW 25 kN
Course Content	Theory: PNP 90, 6 Ton Rivet Tool PNP 90 XT2, 10 Ton Rivet Tool Upgrade Kit BNW 25 kN, Blind Rivet Tool Documentation Storage Cart Practical: Trainer demonstrations Participant exercises
Pre-study	It is recommended that participants read the document below to gain familiarity with the Universal Rivet System before attending the course. Universal Rivet System Brochure
Language	English

▷

CTR9 Resistance Spot Welder

O405 - CTR9 Resistance Spot Welder

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the CTR9 Spot Welder is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the CTR9 Spot Welder Be able to prepare the CTR9 Spot Welder for use Be able to carry out welding using the C-Tong Be able to carry out welding using the Multi Function Gun Be able to setup and use the WeldLogger
Content	Theory: Review of CTR9 Spot Welder Welder Start and Setup C-Tong Modes C-Tong Operation WeldLogger Multi Function Gun Maintenance Practical: Preparing the Welder Using C-Tong and Support arm Welding with the C-Tong Using the WeldLogger Setting up and Welding with the Multi Function Gun Maintenance
Pre-study	It is recommended that participants read the documents below to gain familiarity with the CTR9 Spot Welder before attending the course. CTR9 Product Sheet CTR9 Brochure
Language	English

▷

PointX II Electronic Measuring System

O425 - PointX II Electronic Measuring System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Damage repair – all sections
Aim	To ensure operation of the PointX II is carried out in an optimum and safe way.
Objectives	After the course, the participants should: Be able to identify the key components on the PointX II Be able to prepare the PointX II for use Be able to carry out measuring using the PointX II Understand when to use the PointX II Understand why to use the PointX II Understand how to use the PointX II
Content	Theory: Introduction to the PointX II Measuring hardware Measuring software Vision2 Introduction Workorder tab Preparation tab Measuring tab Documentation tab Menus Features and Benefits Practical: Normal and Point-to-Point measuring From workorder to documentation
*Pre-study*	N/A
Language	English

▷

PNP 90 Riveting Tool

MP111 - PNP 90 Riveting Tool

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repairs – All sections
Aim	To ensure operation of the PNP 90 Riveting Tool is carried out in an optimum and safe way.
Objectives	After the course, the participants should be able to: Identify the key components on the rivet tools Prepare the tools for use Carry out riveting using the PNP 90
Content	Theory: Rivet Tool presentation Rivet Tool preparation Rivet Tool operation After operation Maintenance Practical: Trainer demonstrations Participant exercises
Language	English

▷

Car-O-Tronic Vision2 X3 – Operation

O402 - Car-O-Tronic Vision2 X3 – Operation

Type (delivery)	Classroom/practical
Duration	2 days
Target group (job roles)	Body shop technicians Damage repair – structural components
Aim	To enable the participants to perform measurement on a vehicle on an alignment bench using Car-O-Tronic Vision2 X3, and gain awareness of using draw aligner Q16/D16 and EVO systems.
Objectives	After completing the course, participants should be able to: Set up a vehicle on an alignment bench Perform measurement of a vehicle Understand the importance of the correct measuring methods Understand & demonstrate measuring procedures and results Understand & demonstrate draw aligner and EVO systems.
Content	Theory: Alignment Benches Draw Aligners Measuring system Hardware Measuring system Software Normal measuring HMP measuring Absolute measuring Comparative measuring Point to point measuring Suspension check Surface measuring EVO 1, 2 & 3 Practical: Trainer presentations of all functions. Participant exercises on all functions.
Pre-study	N/A
Language	English, Swedish

The US and Canada

Product Courses

▷

CLEM-00014 - Advanced Bench, Measuring System & Pulling System Training

Target group	Advanced technicians who have been working with Car-O-Liner equipment. This course meets the US I-CAR Structural ProLevel 2 course requirement equivalent for Introduction to Three-Dimensional Measuring – ST055E01.
Previous Training	Basic Electronic Measuring In-Shop Training Basic Frame Bench In-Shop Training
Objectives	This course is an Advanced course for in-depth theory and understanding of the Car-O-Liner Measuring System and Benchrack. The course includes instruction and hands-on exercises using the computerized system to measure both lower and upper body structures as well as the tips and processes used for diagnosis of structural problems as they relate to collision repairs. After completion of the training, the technician will be able to properly and safely identify and demonstrate an advanced understanding and usage of the Car-O-Liner Measuring system and components.
Equipment	Bench Rack or Quick42 Draw aligner Electronic measuring system Car-O-Tronic Vision2 X3 EVO 1-3, truck kit Damaged vehicle
Duration	Two full days, 16 hours at a Car-O-Liner Approved Training Facility
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the measuring slide and cabinet to protect the equipment from damage and debris and how to operate the measuring equipment and components safely Theory and practice: This course will give the attendee an understanding of three-dimensional measuring and how it relates to collision repair. This course will review what types of repairs are most appropriate for the Car-O-Liner equipment. The course will cover how to properly and safely use the Draw Aligner with the frame alignment system. The attendee will learn how Car-O-Liner develops its data sheets and the different components of a Car-O-Liner data sheet. The attendee will learn proper clamping techniques for both unibody and full frame vehicles using Car-O-Liner clamping. This course will provide an in-depth overview of the different components of the Car-O-Tronic measuring system. The course will cover proper centering and measuring techniques for both underbody and upper body measuring. The course will highlight the proper utilization of EVO 1, 2, 3 and the truck kit for anchoring and fixturing for the most accurate, safe and reliable repairs. Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully

▷

CLEM-00015 - Basic Electronic Measuring In-Shop Training

Target group	Entry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course meets the US I-CAR Structural ProLevel 2 course requirement equivalent for Introduction to Three-Dimensional Measuring – ST055E01.
Previous Training	None required. However, this course is typically taught in conjunction with CLEM-00008: Basic Frame Bench.
Objectives	This class focuses on the use of the Computerized Measuring System to accurately analyze, document and repair structural collision damage. The course includes instruction and hands-on exercises using the computerized system to measure both lower and upper body structures as well as the tips and processes used for diagnosis of structural problems as they relate to collision repairs. After completion of the training, the technician will be able to properly and safely identify and demonstrate an understanding and usage of the Car-O-Liner Measuring system and components.
Equipment	Bench Rack or Quick42 Draw aligner Electronic measuring system Car-O-Tronic Vision2 X3 EVO 1-3 Truck Clamps / Specialty Clamps Damaged vehicle
Duration	One Day, In-Shop Training
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the measuring slide and cabinet to protect the equipment from damage and debris and how to operate the measuring equipment and components safely. Measuring System Setup: This course will give the attendee hands-on interaction with installing, removing, and storing the Measuring Bridge. The attendee will learn how to select the correct vehicle data sheet, understand the indexes and data sheet layout. The course will show how to determine proper clamping as well as utilize print, zoom and the photo sheet. Measuring System Operation: This course will cover in detail how to choose the proper centering points, measuring cups and adapters and an understanding of the QR Function. The course will cover performance of a quick check, the comparative measuring operation, absolute/point to point (P2P)/suspension measuring and upper body measuring using the high measuring point (HMP). The course will also highlight the EVO information that is available within the software. Measuring System Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully. This will also include proper cleaning of the measuring slide and bridge, LM sensor care and performing a scale test

▷

CLEM-00018 - Basic Resistance Welder In-Shop Training

Target group	This course is designed for the entry to advanced technician using Car-O-liner resistance spot welder. This course meets the US I-CAR Structural ProLevel 2 course requirement equivalent for Introduction to Squeeze-Type Resistance Spot Welding – ST010E01 or Squeeze-Type Resistance Spot Welding Hands-On Skills Development – ST015L01.
Previous Training	None required
Objectives	This class is an introduction to the Car-O-Liner resistance spot welder and focuses on how to accurately and safely operate the resistance spot welder and its components. The course includes instruction and hands-on exercises using the resistance spot welder as it relates to collision repairs. Upon completion of the training, the technician will be able to properly and safely operate the Car-O-Liner resistance spot welder and component
Equipment	CTR12000, CTR7 or CTR9 A-tong adapters
Duration	One full day, 8 hours
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the welder specifications and how to operate the welder and components safely Welder Setup: Welder setup will cover how to connect the main power and compressed air. The attendee will learn how to place and remove the C-gun from the holder, check and fill the coolant level and use the tool balancer and support arm. Operation: This course will provide an understanding of how to navigate the control panel, change the C-arms, fender edge arm and A-tong. The technician will learn how to start and calibrate the welder and view weld results. The hands-on operation of the welder includes cleaning, dressing, changing electrode caps, setting the welder, multi-function gun setup, automatic modes, pre-pulse and air pressure. Technique & Practical: The technician will learn the importance of weld preparation and the importance of following OEM procedures. The technician will weld multiple thicknesses relative to today’s collision repairs, like unisides, rails, rockers, etc Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully.

▷

CLEM-00016 - Basic Frame Bench In-Shop Training

Target group	Entry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course qualifies as an Annual Training Alliance Course for I-CAR US.
Previous Training	None required. However, this course is typically taught in conjunction with CLEM-00015: Basic Electronic Measuring.
Objectives	This class is an introduction to the Car-O-Liner frame bench and focuses on how to accurately and safely operate the Frame Bench and its components. The course includes instruction and hands-on exercises using the frame bench as it relates to collision repairs. Upon completion of the training, the technician will be able to properly and safely operate the Car-O-Liner frame bench and components.
Equipment	Bench Rack or Quick42 Draw aligner EVO 1-3 Truck Clamps / Specialty Clamps Damaged vehicle
Duration	One Day, In-Shop Training
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the frame bench specifications and how to operate the frame bench equipment and components safely. Frame Bench Operation: This course will give the attendee hands-on interaction to mount and anchor a full frame Vehicle. The course will cover frame bench controls, lift and tilt functions to properly and safely load and unload vehicles. The course will cover proper installation and use of the ramps, air jack and pillar jacks to properly and safely load and unload vehicles. The course will cover proper use of the frame bench Draw Aligner, bench arms, cam locks, truck kits and specialty clamps. The attendee will learn how to select the correct vehicle data sheet to determine proper clamping and correct set-up of the frame bench. Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully.

▷

CLEM-00017 - Speed Frame Bench In-Shop Training

Target group	Entry level technicians that are just starting to work with Car-O-Liner equipment. Typically, this training occurs within 90 days of installation; or for new employees needing training on the Car-O-Liner equipment. This course qualifies as an Annual Training Alliance Course for I-CAR US.
Previous Training	None required.
Objectives	This class focuses on the use of the Car-O-Liner Speed frame bench to accurately and safely operate the Speed Frame Bench and its components. The course includes instruction and hands-on exercises using the Speed frame bench as it relates to collision repairs. After completion of the training, the technician will be able to properly and safely operate the Car-O-Liner Speed frame bench and components.
Equipment	Speed Bench Draw aligner EVO 1-3 Truck Clamps / Specialty Clamps Damaged vehicle
Duration	One Day, In-Shop Training
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the Speed frame bench specifications and how to operate the Speed frame bench equipment and components safely. Speed Frame Bench Operation: This course will give the attendee hands-on interaction to mount and anchor a full frame Vehicle. The course will cover the pendant controls and lift functions to properly and safely load and unload vehicles. The course will cover proper installation and use of the ramps and hydraulic jack to properly and safely load and unload vehicles. The course will cover proper use of the Speed frame bench Draw Aligner, bench arms, side-pull adapter, truck kits and specialty clamps. The attendee will learn how to select the correct vehicle data sheet to determine proper clamping and correct set-up of the Speed frame bench. Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully.

▷

MIG/MAG Welding

Target group	This course is designed for the entry to advanced technician using Car-O-liner MIG/MAG welder.
Previous Training	None required
Objectives	This class is an introduction to the Car-O-Liner MIG/MAG welder and focuses on how to accurately and safely operate the MIG/MAG welder and its components. The course includes instruction and hands-on exercises using the MIG/MAG welder as it relates to collision repairs. Upon completion of the training, the technician will be able to properly and safely operate the Car-O-Liner MIG/MAG welder and components.
Equipment	CMI™3000, CMI™300 or CMI™ 273
Duration	One Day, In-Shop Training
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the welder specifications and how to operate the welder and components safely. Welder Setup: Welder setup will cover how to connect the main power, shielding gas requirements and use of the flow gauge. The attendee will learn how to change the wire feed kit and load welding wire. Operation: The course will cover understanding and navigating the Control Panel, Setting the Primary Parameters and adjusting the Secondary Parameters and Master Reset. The course covers customizing the weld with Arc Length and Arc Adjust, Pulse and Double Pulse Functions and using the welders Quick Guide as a resource. Technique & Practical: The technician will learn the importance of weld preparation and the importance of following OEM procedures. The technician will weld multiple thicknesses relative to today’s collision repairs with focus on: torch angle, work angle, and travel speed; Special considerations for Aluminum and Silicon Bronze; Torch Adjustment and Remote Control. Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully.

▷

CLEM-00021 - CR200 Dent Repair for Aluminum & Steel

Target group	This course is designed for the entry to advanced technician using the Car-O-liner CR200 Aluminum and Steel Dent Repair Station. This course qualifies as an Annual Training Alliance Course for I-CAR US.
Previous Training	On-Line Training Module
Objectives	This class is an introduction to the Car-O-Liner CR200 and focuses on how to accurately and safely operate the CR200 and its components. The course includes instruction and hands-on exercises using the CR200 as it relates to collision repairs. Upon completion of the training, the technician will be able to properly and safely operate the Car-O-Liner CR200 and components.
Equipment	CR200 Dent Repair Station Basic or Advanced Pulling Bars CR200 Consumables
Duration	One Day, In-Shop Training
Course Content	Safety: The safety overview will include information on personal protective equipment (PPE) and an in-depth overview of the CR200 specifications and how to operate the CR200 equipment and components safely. Welder Setup: This course will provide the attendee with an overview of the CR200 Dent Repair Station and the multiple pulling options and consumables available for aluminum and steel dent repair. This course will cover an in-depth overview to provide understanding for selecting the correct electrode / mandrel and grounding rod for the different consumables that are available as options to the technician. This course will also provide hands-on practice for setting up the different pulling bar options that are available. Operation: This course will provide an overview of understanding and using the Control Panel and setting the parameters per the “Operation Controls” Guide. This course will cover panel preparation for Aluminum & Steel, using the hand puller, easy puller, lever bar and pulling bars. The technician will be provided the CR200 Quick Guide as a resource and an overview of the consumables available. Maintenance: The maintenance overview will cover all aspects of maintenance, inspection and best practices to ensure the equipment operates successfully.

阿联酋

Methods Courses

▷

MAG welding

C103 - MAG welding

Type (delivery)	Classroom/practical
Duration	3 days
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable the participant to perform MAG welding on steel body panels.
Objectives	After completing the course, the participants should be able to: Perform MAG welding of different steel materials Understand the importance of the correct methods for welding Understand & demonstrate weld test procedures
Course Content	Theory: Body materials MAG welding process Welding equipment Shielding gases Welding transfer Welding wire types Welding methods & techniques Welding defects Welding stress and distortion Welding tests and inspection Practical: Welder preparation Welding methods Welding positions Welding test and inspection OEM specifications Post test
Language	English Swedish

▷

Resistance Spot Welding

C106 - Resistance Spot Welding

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels Damage Repair – Structural components
Aim	To enable participants to perform resistance spot welding on steel body panels.
Objectives	After the course the participants should: Be able to perform resistance spot welding on different steel materials Understand the importance of correct welding methods Understand and demonstrate test procedures for welds
Content	Theory: Resistance spot welding process Equipment for welding Personal safety equipment Principles for resistance spot welding Vehicle body materials Welding situations Weld quality Verification / Quality Assurance OEM requirements Preparing the welding machine Practical: Preparing the welding machine Maintaining the welder Welding different materials & coatings Destructive testing OEM applications Post test
Language	English Swedish

▷

Alignment – steel components

C301 - Alignment – steel components

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – Exterior body panels
Aim	To enable the participant to perform alignment of steel components of a collision damaged vehicle.
Objectives	After completing the course, the participants should be able to: Chose and use suitable tools and suitable equipment for alignment of steel components Handle equipment according to instructions Adjust and align cosmetic steel panels to original specification Use induction heater to warm and align steel components
Course Content	Theory: Which equipment to use and when and how Safety risks Basic principles for the tools Where you find information on procedures for maintenance and storage of equipment Material characteristics Available repair methods Where you find information on which methods to be used according to OEM requirements Practical: Practical exercises are included in every theoretical subject. Post test
Language	English Swedish

▷

Structural Repairs – steel

C304 - Structural Repairs – steel

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – structural components
Aim	To enable the participant to carry out structural damage repairs to a collision-damaged vehicle
Objectives	After completing the course, participants should be able to: Handle equipment in accordance with instructions Decide on the most efficient methods Select and use appropriate tools and equipment Use equipment without causing damage to equipment, components or vehicles, or injury to persons Use equipment to straighten out body components as required Remove and replace various structural panels, parts, subframes etc. Check body measurements Adjust structural panels and subframes
Content	Theory: Development of body materials Body materials and properties – Steel Service information Deformation and safety zones Collision theory Damage diagnosis Equipment for draw alignment work Work on alignment bench Practical: Practical exercises are included in all theoretical subject areas
Language	English Swedish

Product Courses

▷

Universal Riveting System

O404 - Universal Riveting System

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the Universal Rivet System is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the rivet tools Be able to prepare the tools for use Be able to carry out riveting using the PNP 90 XT2 Be able to carry out blind riveting using the BNW 25 kN
Course Content	Theory: PNP 90, 6 Ton Rivet Tool PNP 90 XT2, 10 Ton Rivet Tool Upgrade Kit BNW 25 kN, Blind Rivet Tool Documentation Storage Cart Practical: Trainer demonstrations Participant exercises
Pre-study	It is recommended that participants read the document below to gain familiarity with the Universal Rivet System before attending the course. Universal Rivet System Brochure
Language	English

▷

CTR9 Resistance Spot Welder

O405 - CTR9 Resistance Spot Welder

Type (delivery)	Classroom/practical
Duration	1 day
Target group (job roles)	Body shop technicians Damage Repair – All sections
Aim	To ensure operation of the CTR9 Spot Welder is carried out in an optimum and safe way.
Objectives	After the course the participants should: Be able to identify the key components on the CTR9 Spot Welder Be able to prepare the CTR9 Spot Welder for use Be able to carry out welding using the C-Tong Be able to carry out welding using the Multi Function Gun Be able to setup and use the WeldLogger
Content	Theory: Review of CTR9 Spot Welder Welder Start and Setup C-Tong Modes C-Tong Operation WeldLogger Multi Function Gun Maintenance Practical: Preparing the Welder Using C-Tong and Support arm Welding with the C-Tong Using the WeldLogger Setting up and Welding with the Multi Function Gun Maintenance
Pre-study	It is recommended that participants read the documents below to gain familiarity with the CTR9 Spot Welder before attending the course. CTR9 Product Sheet CTR9 Brochure
Language	English

申请培训

请在下表中填写相应信息，我们将尽快与您联系。

我们的培训中心

Paris

法国

ZAC de la Butte aux Bergers

1 avenue du Noyer à la Malice

95380 Louvres

+33 134 48-78

Gothenburg

瑞典

Hulda Mellgrens gata 1

421 32 Västra Frölunda

+46 31 721 10 50

Bangkok

泰国

4 Kanchanapisek Road,

Prawet, Bangkok 10250

+66 2026 3255

Sharjah

阿联酋

A2-031, Sharjah Airport

International Free Zone

P.O. Box 123431

+971 6 566 8702

Stockholm

瑞典

Pionjärvägen 77a,

195 61 Arlandastad

+46 31 744 10 02

Larvik

挪威

Sørlandske hovedvei 313

3270 Larvik, Norway

+47 918 523 90

Rugby

英国

UNIT F GREAT CENTRAL WAY BUTLERS LEAP,

RUGBY CV21 3XH

+44 1788 574157

Correggio

意大利

Via Prov. Carpi, 33

42015 Correggio (RE)

+39 0522733411

Babenhausen

德国

Hinter der Altdörfer Kirche 18

D–64832 Babenhausen

+49 (0) 6073 7448-0

Arkansas

美国

309 Exchange Avenue

Conway AR 72032

+1 800-362-4618